MOPAR 2891365 Nos Power Steering Hose 69 V8

( Brand: Mopar ), ( Manufacturer Part Number: 2891365 ), ( Part Type: Steering Hose ), ( Surface Finish: Rubber / Steel ), ( Country/region Of Manufacture: United States, Lebaron, Town & Country, Aspen ), ( Dart: Challenger, Charger, Cornet, Diplomat, Custom, , Polara, Monaco, Barracuda, Belvedere, Satellite, Fury, Gran Fury, Savoy, Suburban Duster )

Review MOPAR Nos Power Steering Cyl Hose Plymouth 69 V8 Chrysler Dodge fits 1970–1972

The 2891365 Mopar power steering hose is an essential component for maintaining the proper functioning of the power steering system in your 1969 Plymouth, 1970 Plymouth, 1970 Chrysler, or 1972 Dodge vehicles equipped with the iconic V8 engine. This high-quality hose is specifically designed to fit the power steering system of these vehicles, ensuring a secure and reliable connection between the power steering pump and the power steering gearbox.

The 2891365 Mopar power steering hose is made of premium materials to ensure durability and longevity. The exterior of the hose is reinforced with a layer of braided stainless steel, providing strength and resistance to external forces such as high temperatures, vibrations, and potential impacts. This braided layer also helps to prevent the hose from kinking, ensuring a steady flow of power steering fluid.

The interior of the 2891365 Mopar power steering hose is made of a durable rubber compound that resists swelling, cracking, and leaking over time. The hose is also reinforced with a layer of reinforcing tape, further enhancing its strength and reliability. The end fittings are made of brass for corrosion resistance and a secure connection to the power steering pump and gearbox.

Installing the 2891365 Mopar power steering hose is straightforward and can be done as a DIY project or by a professional mechanic. The hose comes with clear installation instructions and all necessary hardware, including hose clamps, to ensure a proper fit.

In summary, the 2891365 Mopar power steering hose is a high-quality, reliable, and durable replacement hose for your classic Plymouth or Chrysler/Dodge V8 vehicle. Its braided stainless steel exterior, reinforced rubber interior, and brass end fittings ensure a secure and reliable connection, while its easy installation makes it a convenient and cost-effective solution for maintaining the proper functioning of your power steering system.

1. OEM (Original Equipment Manufacturer) part: This hose is directly from Chrysler's Mopar division, ensuring it fits perfectly and meets the original specifications.

2. High-quality materials: Made from durable and flexible rubber, the hose can withstand extreme temperatures and resist corrosion.

3. Long-lasting: The Mopar hose is designed to provide reliable service for an extended period, reducing the need for frequent replacements.

4. Compatible with various models: The hose is compatible with Plymouth, Chrysler, and Dodge vehicles from 1970 to 1972 with V8 engines, making it a versatile option for many car owners.

1. Expensive: The Mopar hose is typically more expensive than aftermarket alternatives, which could be a disadvantage for budget-conscious customers.

2. Limited availability: It may not be readily available at local auto parts stores, and customers may need to order it online or from a specialized Mopar dealer.

If you value OEM quality, durability, and a long-lasting solution, the Mopar 71 power steering hose is an excellent choice for your Plymouth 69 V8, Chrysler, or Dodge models from 1970 to 1972. While it may be more expensive, the hose's superior performance and compatibility ensure a reliable and hassle-free experience. If budget is a concern, consider exploring aftermarket alternatives or seeking out discounts or promotions to reduce the cost.

Details:

It has a 5 16 inverted male flare nut on one end and 3/8 inverted male flare nut on the other end, both takes an o ring. The hose does not have a box.

They are showing this hose is used for all 6 cylinder and most of the v8 cars in various model's. These hoses have been replaced various times and the bends are not always the same, making them difficult to install sometimes. If you should have an old Mopar hose the parts number may be stamped in one of the metal ends. However, Mopar made the changes and they are supposed to work.

Plymouth, Dodge and Chrysler if you bought this for the wrong car, it is not returnable. If you can get a number off the old hose, that is best.

The rubber part of the hose is about 14 inches long. Note this original Mopar parts number hose was made for particular cars or model's and there are other numbers that replaces more than one Mopar number.

Both metal tube ends are bent. This has been on the shelf in a closed old time mechanics garage for several years, in a closed large box with other hoses, rubber is in good condition and not showing any defects.

With Chrysler power steering pump.

Check the photos, see if it looks right. Do not wait until a few hours or minutes before the offer ends, I am not at the computer at all times. This number is stamped on the end fitting body.

The best I found it may have been used for 6 cylinder and v8 cars in the 1969 to 1972 range. I do not know which cars for sure.

I have a gates cross over catalog, however, I am not sure it is correct. The hose appears to be good usable condition.

part #: 2891365 prices

• $28.11-$54.99

specifications suspensiosteeri:

• for makes: Mopar, Plymouth, Chrysler, Dodge
• for years: 1970-1972
• brand: Mopar
• mpn: 2891365
• part type: Steering Hose
• surface finish: Rubber / Steel
• country/region of manufacture: United States, Lebaron, Town & Country, Aspen
• dart: Challenger, Charger, Cornet, Diplomat, Custom, , Polara, Monaco, Barracuda, Belvedere, Satellite, Fury, Gran Fury, Savoy, Suburban Duster

Payments suspensiosteeri:

• PayPal

General suspensiosteeri:

• in stock: Yes
• Motors > Parts & Accessories > Vintage Car & Truck Parts > Suspension & Steering
• condition: New other see details

Ratings:

1. everyhing was perfect. 07-17-16
2. Great buyer ! Thanks ! 07-17-16
3. spot on 07-22-16
4. Great item 07-16-16
5. Quick response and fast payment. Perfect! Hydroelectric2009 thanks you. 07-16-16

Returns suspensiosteeri:

• paid by: Buyer
• type: Money Back
• policy: returns accepted
• time: 30 Days

Shipping suspensiosteeri:

• cost: $9.0
• handling: 1 days
• type: Flat

Offer suspensiosteeri:

• best offer: false
• # bids: 0
• # Sold: 0
• quantity: 1
• min. bid: $69.00
• : true
• Started: July 27, 2016, 5:44 pm

Seller suspensiosteeri:

• zipcode: 47302
• city: Muncie, Indiana

Mopar 2891365 Is Similar To:

• Kit Coupler Nos Part 02800738 Abce Body Steering Mopar (38.2% similar) Includes two shoes, large pin, spring for shoes, small roll pin, body cover and seal. Mopar steering couplet repair kit...(April 15th, 2015)
• 03879924 Mopar Nos Steering Gear (35.1% similar) ...(September 13th, 2017)
• 04443436ac Kit Mopar Coupler Repair Steering (36.5% similar) Mopar part number ac new in factory bag genuine Mopar parts steering couplet rebuild kit for an a body Mopar. I bought this for a 1966 barracuda that was eventually sold...(May 2nd, 2015)
• 04721393aa Mopar Leaf Spring Shackles Hangers Nos (32.1% similar) Postal service, fed ex, ups. Leaf spring shackles hangers nos Mopar 04721393AA images to. This item has been in our indoor storage. 04721393AA please see photos below. This item is in good condition. Kramer automotive specialties inc...(July 28th, 2018)
• 05072586aa Mopar Steering Linkage Parts Pn For Chrysler Dodge Eagle Jeep (33.8% similar) Steering linkage parts for chrysler dodge eagle jeep. See picture for included parts...(April 9th, 2018)
• 055470 Mopar Dodge Z-bar 82530 (25% similar) I do not know what this came off of...(October 8th, 2017)
• 1-1112478 Mopar Reverse Idler Shaft Dodge Desoto Chrysler Transmission (30.3% similar) Look the photos over good and ask questions. Never a fee for packing material or handling. I describe items to the best of my ability. Mopar reverse idler shaft dodge deist chrysler transmission you are buying on a shaft. I am not an expert so may be wrong. Here to see. In my research someone called...(November 4th, 2018)
• 10-7514 Gt Performance Steering Mopar Wheel Hub Polished 810668021541 (31.8% similar) Any visual damage must be noted on the shipping document before signing for delivery. Part condition new brand performance steering sold each details info this GT9 Mopar hub is designed for installing GT9-BOLT pattern wheels...(June 8th, 2018)
• 1063654 Dodge Mopar Truck King Pins Nos Part Number (40.6% similar) Nos king pin set for dodge ton trucks VF model's 30, 31 32 33 years this is the original Mopar and price right. Also fits F ton trucks model's 30, 31 32 33 34 36 years...(May 28th, 2018)
• 1064677 Mopar Front Wheel Lower Control Arm Pin Bushing Chrysler Corp (22.5% similar) Item is new in unopened box but the dirty bent. No reserve but item sold as listed, pictured, and described. Ask questions before buying. If there is any discrepancy in the which could happen due to our lack of knowledge about a particular item, always default photos. Shipping: is free to the ...(November 5th, 2018)
• 1064678 Mopar Desoto Chrysler Front Lower Control Arm Bushing (40.6% similar) Nos in box is front wheel lower control arm bushing for: 53 deist cyl chrysler 8/6 sedans estate wagons...(December 24th, 2018)